📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
FRP Grating Specifications

50x50 Molded FRP Grating

Large 2x2 openings for maximum openness where loads and spans allow.

Technical specifications

TypeMolded FRP grating
Mesh opening50 x 50 mm (2 x 2 in)
Thickness options30, 38, 40, 50, 65 mm
Standard panel size1220 x 3660 mm (4 x 12 ft), cut to size
Typical open areaabout 75-80% (typical)
Resin systemsOrthophthalic polyester (IS), Fire-retardant polyester (IF), Vinyl ester (VE)
Surface optionsConcave top, Grit anti-slip

Load and span guidance

Because the wider mesh changes load distribution, panels are selected using the load table over the actual support span; thicker sections (40-65 mm) are used for heavier duty.

Typical applications

  • Docks and marina decking
  • Solar and ventilation
  • Platforms with high drainage needs
  • Light-traffic covers

Sizing, installation and procurement

The mesh opening of 50 x 50 mm (2 x 2 in) is not a detail — it is the main sizing decision. At about 75-80% (typical) open area the deck drains water, oil and swarf quickly while staying closed enough for safety footwear. Where small tools, screws or heels must not drop through, the next smaller mesh is the right answer; where ventilation or wash-down action matters more, this opening is kept and the supports are checked instead.

Mesh and real use

Two panels of the same depth do not behave alike once the mesh changes: a wider opening spreads a point load over fewer bars. For pallet trucks, forklifts or a heavily used workshop floor, the load table is read at the real span — not the depth alone — against the deflection limit, usually L/200 on walkable decks. We run that check against your drawing and state the allowable span between supports before you order.

Depth, load and span

This reference is produced in 30, 38, 40, 50, 65 mm mm. Adding depth buys stiffness as much as strength: the right move when the span has to grow without an intermediate bearer, or when the area is crossed by heavy plant. The thinner option stays cheaper on short spans without giving away safety.

Resins and finishes

Resin options are Orthophthalic polyester (IS), Fire-retardant polyester (IF), Vinyl ester (VE). Finishes: Concave top, Grit anti-slip. Vinyl ester is the choice for acids, alkalis and chlorides; fire-retardant polyester to ASTM E-84 for areas under a fire requirement; orthophthalic polyester remains the economical standard. The concave (meniscus) top holds water and oil inside the mesh and grips better when wet; the gritted version suits ramps, stairs and busy outdoor areas; the smooth top makes wash-down easier in food and pharma rooms.

Cutting and fixing

Standard panel 1220 x 3660 mm (4 x 12 ft), cut to size, cut in the works to drawing with deburred edges. Fix with M, C, L or Z clips and stainless bolts; on trafficked or wind-exposed decks, add through-bolting at the corners. Production is 15-25 days for standard sizes, 12-36 working days end to end, from 10 m², with single-piece samples available. For project cuts we issue a packing list with weight and bundle sizes so freight can be quoted before shipment.

Plant and documentation

Made in our own plant in Nantong: 20,000 m², 200+ staff, in production since 2004. The company holds ISO 9001 and has its products tested to ASTM E-84 and ASTM F3059, with ABS, Intertek and SGS documentation on file and CE marking on the product. Certificates and test reports are provided on request.

Technical data sheets (PDF)

Data sheets carry no certificate numbers; full test reports are sent on request.

Related resources

FAQ

Is 2x2 mesh safe to walk on?
Where does 50x50 perform best?

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to sales@gratingfrp.com. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: sales@gratingfrp.com