FRP Grating Panels
Molded & Pultruded FRP Grating · Vinyl Ester · Custom Sizes · Engineering Support — ISO 9001 certified factory with 20+ years experience, exported to the USA, Australia and 45+ countries.
What Is FRP Grating?
FRP (Fiberglass Reinforced Plastic) grating — also known as fiberglass grating, fibreglass grating or GRP grating — is a lightweight, high-strength composite flooring panel made from glass fiber reinforcement and corrosion-resistant thermoset resin. It is the most widely used term across North America, and the standard solution for industrial walkways, platforms and access flooring.
FRP grating combines the strength of glass fiber with the corrosion resistance of resin, giving you a flooring, walkway and platform solution that will not rust, rot or corrode — even in aggressive chemical, marine and wastewater environments. Unlike steel, FRP grating is non-conductive, low-maintenance and weighs only about one-quarter of equivalent steel panels, making it dramatically easier to handle and install.
FRP vs GRP vs Fiberglass: They are the same material. FRP (Fiberglass Reinforced Plastic) is the term most used in the US and global industrial markets; GRP (Glass Reinforced Plastic) is common in the UK and Commonwealth; fiberglass grating is the plain-English name. FRP Grating Master supplies all three, in molded and pultruded construction.
FRP Grate: Same Product, Different Word
FRP grate and FRP grating are interchangeable spellings for the same product in the composites industry. A grate is simply the anti-slip, open-mesh fiberglass reinforced plastic panel described on this page. If your drawing, quotation or specification says "FRP grate", it refers to this FRP grating — the open, grid-like FRP composite flooring we manufacture and export.Molded and Pultruded FRP Grating
Molded FRP Grating
Continuous glass fiber mat and resin compression-molded into a strong, uniform open-mesh panel. Ideal for general walkways, platforms and heavy pedestrian and light vehicle traffic. Grit-top anti-slip surface available.
Pultruded FRP Grating
High-strength I-bar and T-bar pultruded construction for large spans and heavy industrial loads. Excellent for offshore, chemical plant and long-span platforms.
FRP Grating Clips
Stainless steel M, C, L and Z clips to secure FRP grating panels quickly and safely, available in SS304 and SS316.
Why Choose FRP Grating?
Corrosion Resistant
Impervious to rust, rot and chemical attack. Ideal for wastewater, chemical plants, marine and offshore.
Anti-Slip Surface
Grit-top and concave surfaces give reliable slip resistance in wet, oily and greasy conditions.
Lightweight
About a quarter the weight of steel — faster, cheaper installation with no heavy lifting equipment.
Non-Conductive
Electrically insulating and non-magnetic — safe for electrical rooms and live-plant environments.
Fire Retardant
Fire-retardant resin grades meet relevant flame-spread ratings for industrial safety.
UV Stable
UV-stabilized resin systems resist sunlight degradation for long outdoor service life.
Lightweight FRP Grating
Lightweight FRP grating weighs roughly one quarter of steel, so a single installer can carry full panels on site and freight and crane costs drop on every project.
FRP Grating Specifications
FRP Grating Applications
Trusted by engineers, contractors and distributors across the USA, Australia, the Middle East and beyond for corrosion-proof flooring and access systems.
Walkways & Platforms
Industrial walkway and platform grating for plants, refineries and factories.
Trench & Drain Covers
FRP trench cover grating and drainage grating for municipal and industrial works.
Stair Treads
Anti-slip FRP stair tread grating for safe vertical access.
Marine & Offshore
Dock, deck and offshore FRP grating in corrosive salt environments.
Water & Wastewater
Treatment plant walkways and covers that never corrode.
Food & Beverage
Food-grade, easy-to-clean FRP flooring for processing areas.
Car Wash FRP Grating
Car wash FRP grating keeps detergent- and chemical-soaked bays drained and slip-safe, with a gritted top that survives daily vehicle traffic.
Direct Manufacturer, First-Class Quality, Competitive Price
FRP Grating Master is a real FRP grating factory — not a trading company. In-house molding and pultrusion give us full control over quality, pricing and lead times, so you get first-class FRP grating at factory-direct prices.
Factory Direct Pricing
Buy straight from the manufacturer — no middleman markup.
Full Quality Control
Incoming material inspection, in-process checks, load testing and traceable records.
Custom Engineering
Custom sizes, colors, surface treatments and tooling from CAD to production.
Global Shipping
FOB, CIF or DDP worldwide with full documentation: COA, MSDS and load test reports.
FRP Grating FAQ
Request Your FRP Grating Quote
Manufacturer & Certifications
Manufactured by NANTONG ZEALL NEW MATERIALS CO., LTD. in Nantong, Jiangsu, China. Contact our export team at sales@gratingfrp.com or +86 513 6681 9918. Every panel is produced under an ISO 9001 quality system, CE marked, fire-rated to ASTM E-84 Class B, and independently tested to Intertek and ABS standards. We supply direct from our own production factory to customers in 45+ countries.Keyword Reference: English, Español, Deutsch, Français
- FRP grate = ES: rejilla FRP (grate) · DE: FRP-Rost (grate) · FR: grille FRP (grate)
- FRP trench cover grating = ES: rejilla para cubierta de zanja de FRP · DE: FRP-Kanalabdeckungsrost · FR: caillebotis FRP pour couvercle de tranchée
Looking for GRP Grating (glass reinforced plastic grating)? GRP grating is the same composite product as FRP grating — explore our dedicated GRP grating page for moulded and pultruded GRP panels, anti-slip surfaces and heavy-duty applications.
Specifications
| Parameter | Value |
|---|---|
| Thickness | 25 / 30 / 38 / 50 mm |
| Mesh size | 38×38 mm / 19×19 mm / 12×12 mm |
| Panel size | 1220×3660 mm (standard) |
| Surface options | Grit-top / Concave / Smooth / Covered |
| Resin system | Isophthalic / Vinyl Ester / Phenolic |
| Color | Grey / Green / Yellow / Custom |
Installation & Selection Guide
Step 1: Choose your application. Walkways, platforms, trench covers, stair treads, and marine jetties each require different panel thickness and surface finish. Anti-slip gritted surface is recommended for wet or oily environments; smooth surface for light-duty walkways.
Step 2: Select mesh and thickness. 25mm thickness suits pedestrian walkways; 38–50mm for heavy-duty vehicle or long-span applications. 38×38mm mesh is standard; 19×19mm for small-part containment or anti-fall protection.
Step 3: Pick the right resin. Isophthalic resin for general industrial use; vinyl ester for chemical plants and offshore; phenolic for fire-rated environments.
FRP vs Steel vs Aluminum
| Feature | FRP Grating | Steel Grating | Aluminum |
|---|---|---|---|
| Weight | Light (1/4 of steel) | Heavy | Medium |
| Corrosion | Never rusts | Rusts without paint | Resists oxidation |
| Electrical | Insulating, non-magnetic | Conductive | Conductive |
| Maintenance | Zero painting | Paint / galvanize | Low |
| Cost | Medium (long-term ROI) | Low upfront | High |
FAQ
What is FRP Grating Panels?
FRP Grating Panels is a fiberglass-reinforced composite panel used for walkways, platforms, trench covers and anti-slip flooring. It is lightweight, corrosion-proof and electrically insulating.
How strong is FRP Grating Panels compared to steel?
FRP grating panels compete with steel on load-bearing while weighing about 75% less, reducing structural and installation cost. Heavy-duty pultruded panels match steel for long spans.
Can FRP Grating Panels be cut to size?
Yes. FRP panels are cut on-site with standard power tools. Custom sizes, openings and notches are available factory-direct.
What surface finish is best for outdoor use?
Grit-top (anti-slip) surface is recommended for outdoor walkways, stair treads and wet areas. UV-stabilized resin prevents fading in direct sunlight.
How long does FRP grating last?
Typical service life is 20+ years in industrial environments with no painting or maintenance. ISO 9001 manufacturing ensures consistent quality.
Is FRP Grating Panels fire-resistant?
Phenolic resin panels achieve fire-rated performance for enclosed plant rooms. Standard isophthalic and vinyl ester resins are self-extinguishing.
Buyer's Checklist
- Application: walkway / platform / trench / stair / marine
- Required thickness (25 / 38 / 50 mm)
- Mesh size (38×38 / 19×19 mm)
- Surface finish (grit-top / smooth / concave)
- Resin system (iso / vinyl ester / phenolic)
- Color and custom dimensions
- Clips and fixing hardware (M / C / L / Z type)
FRP Grating Panel Types and Sizes: How to Select
Panels are produced in molded and pultruded constructions and can be ordered as standard sheets or cut to fit the exact layout. Matching the panel type to the load and span is the core selection step.
- Molded panels: one-piece square or mini mesh sheets for general walkways, platforms, trench covers and corrosion-prone areas.
- Pultruded panels: high-strength bearing-bar construction for longer spans and heavier concentrated loads.
- Thickness: common 25, 38 and 50 mm builds, with heavier panels selected for longer spans or higher load.
- Mesh and surface: choose standard or mini mesh and grit-top, concave or smooth finish based on slip and debris requirements.
- Cut-to-size: panels can be factory cut to drawings with openings and edges prepared, reducing on-site work.
Confirm dimensions against the specifications hub, the standards reference and the fiberglass grating guide.
Related Pages
FRP Grating · GRP Grating · Fiberglass Grating · Anti-slip FRP Grating · Molded FRP Grating · Pultruded FRP Grating
Fiberglass floor grating panel: standard 1220×3660 sheets
A Fiberglass floor grating panel ships from the pultrusion line as a standard 1220 mm × 3660 mm sheet—the dimension that fits a shipping container on edge and a standard pallet flat. Panel depths run 25, 38, 50 and 65 mm; a 38 mm pultruded panel weighs about 87 kg and a 50 mm panel about 120 kg. The sheet is the unit of trade: projects are quoted in sheets, then cut on site or in our factory to the required footprint. All panels are manufactured under ISO 9001 (01708Q11888R0S) and ASTM F3059 (211122012SHF-001).
As an FRP grid panel, the sheet is a one-way or two-way mesh of load bars tied by cross rods, resin-rich on the wearing face and grit-topped for slip resistance. It is the unit that bolts onto support frames made of FRP structural profiles or steel angles. MOQ 10 m², lead time 12–36 working days; standard iso-poly sheets ship fastest, vinyl ester and phenolic at the longer end. See the full family on the FRP grating overview.
FRP grid panel: mesh size, open area and load direction
The mesh size is the spacing of the load bars and the cross rods. Standard pultruded meshes are 38×38 mm, 38×152 mm and 19×152 mm; standard moulded meshes are 38×38 and 19×19. Open area runs 65–75 % for pultruded and 55–65 % for moulded. The load direction matters: on pultruded panels, load follows the long bar—always lay the long bars perpendicular to the supports, never parallel. On moulded panels the mesh is two-way, so orientation is free.
Pultruded fiberglass grid and Pultruded FRP grid panel—cutting and edge banding
A Pultruded fiberglass grid sheet is cut to size with an abrasive saw or a diamond blade; chainsaw teeth fray the fibers and are not recommended. Cut edges expose the glass, so they are sealed with the same resin as the panel and then capped with an edge band—usually a pultruded FRP angle or a U-channel—that protects the bar ends and gives the fixer a clean landing. The edge band is what turns a cut-up sheet into a finished Pultruded FRP grid panel that meets the floor flush and clips to the surrounding frame.
We supply panels three ways: full 1220×3660 sheets for on-site cutting, factory-cut to drawing with edge bands pre-fitted, or fully assembled walkway sections with FRP clips and edge angles. Factory-cut is the fastest on site: each section drops onto the support frame, clips down, and the tradesman walks away. For vehicle crossings and pallet-truck lanes the panel is upsized to p50 or p65; for foot-traffic walkways m38 or m38-50 is the default. Load tables: m25 12.5/6.0/3.2, m38 25/12/6.5, m38-50 22/10/5.5, p38 35/18/9, p50 48/26/14, p65 62/35/20 kN/m².
Pultruded FRP grid panel: from standard sheet to cut-to-size
The cut-to-size process starts from a drawing: the engineer marks each panel's length, width, cut-outs for columns, pipes and drains, and the clip positions. Our workshop bands the long edges with FRP angle, seals the short cuts, and stencils the panel number on the back. On site the installer matches the number to the layout drawing and clips down. This is how a 500 m² platform goes up in a day rather than a week. See our engineering pack on the FRP grating supplier page.
FRP Grating Panels: Frequently Asked Questions
What is the standard size of a Fiberglass floor grating panel?
Standard sheet is 1220 mm × 3660 mm, depth 25 / 38 / 50 / 65 mm. A 38 mm panel weighs about 87 kg. Sheets ship fastest in iso-poly; vinyl ester and phenolic sit at the longer lead time. MOQ 10 m², lead time 12–36 working days.
Can an FRP grid panel be cut on site?
Yes, with an abrasive saw or diamond blade—never a chainsaw, which frays the fibers. Cut edges must be resin-sealed and capped with an FRP angle or U-channel edge band. For finished floors we recommend factory-cut with edge bands pre-fitted; on-site cutting is reserved for field adjustments.
Which way does the load run on a Pultruded FRP grid panel?
Along the long pultruded bar. Always lay the long bars perpendicular to the supports so the bar depth carries the span. On moulded panels the mesh is two-way and orientation is free. Load tables (kN/m² UDL): m25 12.5, m38 25, m38-50 22, p38 35, p50 48, p65 62.
Product and factory gallery










Buyer feedback — 4.9 / 5 from 541 verified buyers
“Planted 480 m² of moulded grating on our acid tank platform — no corrosion after two winters of service.”
“We replaced the steel walkway covers on the quay; the crew was walking on the new panels the same week they arrived.”
“Cut-to-size panels fitted our trench covers exactly, so there was no site trimming and no wasted material.”
“The gritted surface still grips in wet weather, and our safety auditors signed off on the walkway.”
“Easy to wash down between production runs — that was the main reason we moved from steel to FRP.”
“The quotation with drawings came back in a day, and the phenolic panels met our low-smoke specification.”
