Custom & Cut-to-Size FRP Grating
Cut-to-Size FRP Grating · Shaped Cut-Outs · Bolt Holes · Stair Treads — custom molded & pultruded panels manufactured to your drawing, with low minimum order and fast factory-direct quoting.
Need custom FRP grating cut to size? FRP Grating Master manufactures made-to-measure fiberglass grating panels to your exact dimensions. Instead of forcing your project into a stock panel, we mould or pultrude the grating, then cut, edge, drill and finish it to match your drawings — including openings for pipes, columns, handrail posts and equipment. Whether you need a single replacement panel or a full platform package, our engineering team turns your dimensions into a production-ready quote.
How Our Custom Process Works
Step 1 — Send Your Dimensions
Email your drawing, sketch or measured dimensions (panel size, thickness, bar spacing, resin, surface and any cut-outs) to sales@gratingfrp.com. Photos of the existing installation help.
Step 2 — Engineering Quote
We confirm feasibility, resin system, surface type and quantity, and return a firm quote with lead time. No hidden cutting or processing surcharges.
Step 3 — Manufacture & Cut-to-Size
Panels are moulded/pultruded, then cut to your size, edged, drilled and deburred. Cut-outs and bolt holes are machined to drawing before QC inspection.
Step 4 — QC & Delivery
Each custom order is checked against the drawing, packed and crated for container or LCL shipment, with COA, MSDS and load test reports.
What We Can Customise
Sizes, Thicknesses & Resins
Standard 25/30/38/50 mm thickness; polyester, isophthalic or vinyl ester resin; UV-stabilised for outdoor use. Choose molded or pultruded depending on load and span.
Shapes, Cut-Outs & Details
Rectangular, trapezoidal and shaped panels; pipe/column cut-outs; bolt holes and fixing slots; anti-slip gritted or concave surfaces; stair tread nosings. See anti-slip FRP grating and FRP stair tread grating.
Minimum Order & Lead Time
We accept low MOQ for custom cut-to-size panels (even single replacement pieces). Typical lead time is 2–4 weeks depending on quantity. Browse products or request a quote via contact.
Cut to Size FRP Grating
Cut to size FRP grating is delivered pre-cut to your drawings: panels, stair treads and trench covers with cut-outs and bolt holes, with no factory minimum waste.
Custom FRP Grating Technical Specifications and Options
Custom FRP grating is produced to your drawing — specific thickness, mesh, resin, colour, panel size, cut-outs and edge details. Our Nantong plant molds and pultrudes in-house, so custom work is controlled from resin bath to CNC cutting rather than outsourced.
| Parameter | Customisable Options | Standard Default |
|---|---|---|
| Panel thickness | 25 / 30 / 38 / 50 / 75 / 100 mm | 38 mm |
| Mesh / bar spacing | 38×38, 19×19, custom grids | 38×38 mm |
| Panel size | Cut to any length up to 6 m | 1220×3660 mm |
| Surface | Grit-top / Concave / Covered / Smooth | Grit-top |
| Resin | Iso-polyester / Vinyl Ester / Phenolic | Isophthalic polyester |
| Colour | Any RAL colour on request | Grey / green |
| Cut-outs | Holes, notches, curved edges, stair treads | None |
Standard vs Custom FRP Grating
Not every project needs custom work. Use this quick check to decide whether a stock panel with field cutting is enough, or whether factory-custom production is worth the small extra lead time.
| Factor | Standard Stock Panel | Custom Production |
|---|---|---|
| Lead time | Ready to ship | 15–35 days |
| Panel size | Fixed 1220x3660 mm | Any size up to 6 m |
| Cut-outs | Cut on site | Pre-cut to drawing |
| Colour | Grey / green | Any RAL |
| Resin | Polyester / vinyl ester | Plus phenolic, special mixes |
| Best for | Simple rectangular areas | Fits, interfaces, branded projects |
Resin Selection for Custom Orders
Because custom panels are made to order, you can specify the exact resin the environment needs — not the one a trader happens to stock.
| Resin | Relative Cost | Chemical Resistance | Fire Rating | Best For |
|---|---|---|---|---|
| Isophthalic polyester | Baseline | Good | ASTM E-84 Class B | General walkways, platforms |
| Vinyl ester | +15–25% | Excellent (acids, alkalis, salt) | ASTM E-84 Class B | Chemical, marine, wastewater |
| Phenolic | +20–35% | Moderate; low smoke | ASTM E-84 Class A | Tunnels, rail, fire-critical |
Custom Options We Can Produce
Customisation covers more than dimensions. Anything your drawing calls for — matched profiles, special mesh, colour, or pre-drilled fixing — is produced on the same line as stock panels.
| Custom Feature | Example | Notes |
|---|---|---|
| Special mesh / opening | 12×12 mm anti-fall grid | For small-object containment |
| Pre-cut shapes | Cut-outs for pipes, columns | CNC cut to drawing |
| Stair treads | Nosings, anti-slip edges | Supplied with anti-slip nosing |
| Colour matching | Custom RAL on request | See colour options |
| Matched profiles | Handrail, support beams | See pultruded profiles |
Installation of Custom Cut-to-Size Grating
- Check drawings and confirm bearing support; lay panels on clean, level steel or GRP beams with the recommended bearing width on each support.
- Pre-drill fixing holes only where needed; align panels to the grid and leave a 10–15 mm expansion gap between adjacent panels.
- Fasten with stainless steel FRP grating clips — minimum 4 clips per 1220×3660 mm panel, one at each corner, plus extra clips for heavy traffic or wind-uplift zones.
- Cut panels with a carbide-tipped or diamond blade; wear dust protection and seal cut edges on vinyl ester or phenolic panels when required.
- Walk the installed grid to check deflection and clip torque, then clear offcuts and install edge trim or toe-kicks where specified.
Because pre-cut panels arrive to your drawing, on-site cutting is minimised. Keep the drawing and panel identification tags on site so each panel goes to the correct bay; see the installation guide.
Custom Grating Applications
Plant retrofits: custom cut-outs around existing pipes, columns and equipment let new grating fit a mature site without heavy on-site fabrication.
Stair and tread packages: matched-width treads with anti-slip nosings, supplied as a kit, speed up staircase and platform overhauls.
Branded and specialist projects: custom colour, resin and mesh for marine, wastewater or architectural projects where off-the-shelf panels will not meet the spec.
Our Custom Process: Drawing → Prototype → Mass Production
Our custom workflow keeps quality high and surprises low:
1. Drawing review: send your layout, load, environment and fixing details. Our engineering team confirms feasibility, recommends thickness, mesh and resin, and returns a quoted layout.
2. Prototype / trial sample: before mass production we cut or mold a trial piece or small batch so you can check fit, colour, surface and dimensions. Material test reports accompany the sample.
3. Mass production: once the sample is approved, production runs under the ISO 9001 system with batch traceability — resin lot, glass lot and cure parameters recorded for every panel.
4. QC and shipment: finished panels are dimension-checked, labelled bay-by-bay, packed for export and shipped with full COA and loading plans. Typical custom lead time is 25–35 days after drawing approval.
Related Products and Guides
- FRP Molded Grating — custom mesh and cut-out panels
- FRP Pultruded Grating — bespoke bar profiles and lengths
- FRP Covers & Panels — custom trenches and covers
- FRP Grating Price — custom cut-to-size quoting
- Color Options — standard and custom RAL colours
- Installation Guide — cut-to-size fixing workflow
Request Your Custom FRP Grating Quote
Email sales@gratingfrp.com · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
Custom FRP Grating FAQ
Custom Pultruded FRP Grating: Design, Notches and Openings
A custom pultruded FRP grating order starts from a cut list or a dimensioned drawing, not from a stock size. We saw and CNC-cut panels to the bearer layout, notch around columns and pipe risers, and drill fixing holes for pultruded grating supplier-standard clip systems. Standard panel is 1220 × 3660 mm; anything else is cut from that sheet rather than moulded on demand.
Cut edges that will sit in chemical or wash-down service are given a resin coat before dispatch. This is the same engineering behind pultruded FRP grating panels, extended to bespoke footprints for platforms, trench covers, stair landings and equipment surround.
Cut to Size Pultruded FRP Grating: Cut Lists, Tolerances and Finishing
A cut to size pultruded FRP grating order is quoted from your drawing: overall panel, longitudinal or transverse bearing bars, mesh size, resin grade and colour. Tolerances on cut length are typically ±3 mm, and openings for risers, trays and luminaires are sawn with a small edge radius to avoid stress concentrations. Resin choice follows service: isophthalic for general corrosion, vinyl ester for acids and hypochlorite, polyurethane for a hard-wearing top surface.
MOQ is 10 m² and lead time runs 12–36 working days; custom cut lists sit at the longer end where vinyl ester or complex notching is involved. Panels are strapped and container-loaded, clips and bearers consolidated. Send the drawing to FRP grating supplier and we return a cut schedule with span checks.
Also known as: fibreglass = fiberglass; FRP, GRP, GFRP and composite are the same reinforced-plastic family; pultruded / pultrusion and panel / plank / bar grating describe the same mesh under different trade names.
Standard panel and order facts:
| Standard panel | 1220 × 3660 mm |
| 38 mm panel weight | about 87 kg |
| MOQ | 10 m² |
| Lead time | 12–36 working days |
| Founded | 2004 |
| Factory | 20,000+ m², 200+ staff, 40+ export countries |
Custom and Cut-to-Size FRP Grating: FAQ
Pultruded or moulded for a custom shape?
Pultruded, when the cut footprint spans a longer distance or carries a heavier load; moulded, where you need a small integral anti-slip mesh and short spans. Custom pultruded FRP grating is sawn from a standard 1220 × 3660 mm panel, not re-moulded.
What clear span can a cut-to-size panel reach?
The cut does not change the structural value: a 50 mm T-bar walkway at L/200 is good to about 1.2 m. Beyond that, add intermediate bearers. Every cut list is returned with a span check against your loads.
What is the MOQ and lead time for custom work?
MOQ 10 m², lead time 12–36 working days. Simple straight cuts ship fastest; vinyl ester, complex notching and multiple openings carry the longer end.
