FRP Grating Price
FRP Grating Price Guide · Indicative USD Ranges · What Drives Cost — understand fiberglass grating pricing and get an accurate factory-direct quote.
Wondering what FRP grating costs? As a direct manufacturer, FRP Grating Master offers factory-direct fiberglass grating pricing rather than trader mark-ups. Indicative project pricing typically ranges from USD 118 to USD 188 per square metre depending on resin, thickness, surface, quantity and cut-to-size work. This guide explains what moves the price so you can budget accurately and request a firm quote.
What Affects FRP Grating Price
Resin System
Orthophthalic polyester is the most cost-effective general-purpose option; isophthalic polyester adds corrosion resistance at a modest premium; vinyl ester for heavy chemical/offshore service is the highest grade but longest lasting.
Thickness & Process
Deeper panels (38/50 mm) and pultruded profiles use more material and carry higher loads, so cost more than 25/30 mm molded walkway panels. Anti-slip gritted or concave surfaces add a small surcharge.
Quantity & Processing
Larger project orders lower the unit price. Cut-to-size panels, shaped cut-outs, bolt holes and stair tread profiles add processing cost — but still far below steel grating installed life-cycle cost. Shipping to your destination is calculated separately.
How to Get an Accurate Quote
Send Your Requirements
To price accurately, send: panel size and quantity, thickness, resin, surface (gritted/concave), any cut-outs or stair treads, and your destination port. Email sales@gratingfrp.com or use contact.
Compare the Range
Indicative factory pricing runs USD 118–188/m². Browse products, custom cut-to-size grating and our supply capability. Free samples available for evaluation.
FRP Grating Technical Specifications & Sizes
FRP grating price depends first on what you are buying. The table below shows the standard technical parameters for molded and pultruded FRP grating supplied by FRP Grating Master, so you can match your drawing, span and load requirement to the right panel before asking for a quote.
| Parameter | Molded FRP Grating | Pultruded FRP Grating |
|---|---|---|
| Panel thickness | 25 / 30 / 38 / 50 mm | 25 / 38 / 50 / 75 / 100 mm |
| Mesh size | 38×38 / 19×19 / 12×12 mm | 38×38 / 50×50 mm (bar spacing) |
| Standard panel size | 1220×3660 mm | 1220×3660 / 1220×6000 mm |
| Surface options | Grit-top / Concave / Smooth / Covered | Grit-top / Smooth |
| Resin system | Isophthalic / Vinyl Ester / Phenolic | Isophthalic / Vinyl Ester / Phenolic |
| Typical load class | A – C (pedestrian to light vehicle) | B – D (heavy industrial, long span) |
Every panel is cut to your drawing with square or shaped cut-outs, and supplied with COA, MSDS and load test reports. Custom mesh, thickness and colour are available on request.
FRP Grating Price by Type: Molded, Pultruded and Steel
Indicative factory-direct prices for 2026, in USD per square metre (FOB China). Actual quotes depend on resin, quantity, surface and cut-to-size work — these ranges let you budget before you send your RFQ.
| Product | Indicative USD/m² | Typical Use |
|---|---|---|
| Molded FRP grating, 25–38 mm, polyester | 118 – 150 | Pedestrian walkways, platforms |
| Molded FRP grating, 38 mm, vinyl ester | 160 – 188 | Chemical plants, wastewater |
| Pultruded FRP grating, 38–50 mm | 150 – 210 | Long spans, heavy loads |
| Heavy-duty GRP grating, 50–100 mm | 190 – 260 | Forklift and industrial traffic |
| Steel grating (for reference) | 55 – 95 | — but rusts, needs coating and replacement |
Steel grating looks cheaper on paper, but once you add hot-dip galvanizing, repainting and replacement in corrosive service, FRP grating is usually the lower total cost of ownership. See our FRP vs steel grating cost comparison for a full lifecycle analysis.
Resin Selection and Its Effect on Price
The resin system is the single biggest factor in FRP grating price per square metre. Choose the cheapest resin that still meets your environment — never overspend, and never underspecify.
| Resin | Relative Cost | Chemical Resistance | Fire Rating | Best For |
|---|---|---|---|---|
| Isophthalic polyester | Baseline | Good | ASTM E-84 Class B | General walkways and platforms |
| Vinyl ester | +15–25% | Excellent (acids, alkalis, H2S) | ASTM E-84 Class B | Chemical, marine, wastewater |
| Phenolic | +20–35% | Moderate | ASTM E-84 Class A (low smoke) | Tunnels, rail, fire-critical zones |
For a full comparison of resin systems for fiberglass grating, see our vinyl ester vs polyester resin guide or send your chemical list with the RFQ — we will recommend the most economical compliant system.
GRP Grating Price per m²
GRP (glass reinforced plastic) and FRP (fiberglass reinforced plastic) are two names for the same family of glass-fibre-reinforced polymer panels. The GRP grating price per m² therefore moves with the same drivers as FRP: resin system, manufacturing process, panel thickness and finished size. As a rule of thumb, molded GRP panels sit at the more economical end of the range and pultruded GRP panels at the higher end, because deep continuous bars cost more to produce.
Within that range, the price per m² shifts with the process (molded vs pultrusion), the depth or thickness (25 mm through 50 mm, and deeper pultruded sections for heavy duty), the resin chosen (isophthalic as the baseline, with vinyl ester and phenolic carrying a surcharge), and the quantity ordered — container-load and repeat orders earn a volume discount. Cut-to-size panels with cut-outs and special anti-slip surfaces add a small processing premium on top.
Because so many variables converge, the only way to obtain a precise GRP grating price per m² is to send us your specification. Request an exact quote through our contact page or email sales@gratingfrp.com, and we will return a firm price with lead time. FRP Grating Master, NANTONG ZEALL NEW MATERIALS CO., LTD.
Load Performance and Thickness Selection
Price follows the section you actually need. This quick selection table matches common spans and loads to the right thickness — a 25 mm panel is the most economical choice for pedestrian duty, while forklift zones need 50 mm or pultruded profiles.
| Application | Recommended Thickness | Typical Support Span |
|---|---|---|
| Pedestrian walkway | 25 – 30 mm molded | 450 – 600 mm |
| General platform | 38 mm molded | 600 – 750 mm |
| Light vehicle / pallet truck | 50 mm molded | 750 – 900 mm |
| Heavy forklift / long span | 50–100 mm pultruded | 900 – 1500 mm |
Send your span, load and support layout and our engineers will confirm deflection and load class before quoting — this avoids both under-engineering and paying for more section than you need.
Installation Guide and Fixing
- Lay panels on clean, level support beams; allow the recommended bearing width on each support.
- Secure with stainless steel FRP grating clips — minimum 4 clips per 1220×3660 mm panel, one at each corner.
- For heavy traffic or wind-uplift zones, add clips along the long sides (6+ per panel).
- Cut panels with a standard carbide-tipped blade; seal cut edges on vinyl ester or phenolic panels if required.
- Join adjacent panels with a 10–15 mm expansion gap and cover gaps where small objects must not fall through.
See the step-by-step FRP grating installation guide and the grating clip range for fixing details.
Industry Applications and Cost Experience
Wastewater treatment: FRP grating panels in 38 mm vinyl ester are the standard floor for aeration galleries and tank platforms — no rust staining, no shutdown for coating, and a 20+ year service life versus 5–8 years for painted steel in the same H2S environment.
Chemical plants: for acid and alkali exposure, vinyl ester molded or pultruded grating keeps maintenance near zero. Buyers typically save on the full project life even though the panel price is higher than polyester.
Offshore and marine platforms: non-conductive, salt-water resistant FRP grating eliminates electrolysis between walkway and structure; pultruded I-bar grating handles the long unsupported spans common on offshore decks. See marine FRP grating and offshore application notes.
When to Choose Heavy-Duty or Vinyl Ester Grating
Three situations justify paying more than the entry-level 25–38 mm polyester panel: (1) spans beyond 750 mm or forklift traffic — step up to 50 mm or pultruded profiles; (2) aggressive chemicals or marine salt — step up to vinyl ester; (3) fire-critical tunnels and rail — step up to phenolic for ASTM E-84 Class A. In each case the extra upfront cost is repaid by service life, safety and lower maintenance. See heavy-duty GRP grating and load capacity guidance.
Related Products and Guides
- FRP Molded Grating — economical one-piece panels for walkways and platforms
- FRP Pultruded Grating — I-bar and T-bar profiles for long spans and heavy loads
- FRP Grating Clips — M, C, L and Z fasteners in SS304 / SS316
- FRP Grating Cost Guide — full 2026 pricing breakdown
- FRP vs Steel Grating Cost Comparison
- FRP Grating Glossary — 49 industry terms
Request Your FRP Grating Price Quote
Email sales@gratingfrp.com · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
FRP Grating Price FAQ
Download Document
Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!
Thank You!
Your request has been received successfully.
Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!
If you need urgent assistance, please email: sales@gratingfrp.com
