FRP Trench Cover Grating
FRP Trench Cover & Drainage Grating · Anti-Slip · Corrosion-Proof · Load-Rated — fiberglass covers for drains, channels and cable trenches in industrial and coastal environments.
FRP trench and drainage grating covers open channels, floor drains and cable trenches while letting water (or cable access) pass through. FRP Grating Master manufactures corrosion-proof fiberglass trench covers that carry pedestrian and forklift loads without rusting or rotting, with anti-slip tops for safe foot traffic. They are used in chemical plants, food and beverage areas, wastewater treatment, swimming-pool surrounds and coastal drainage.
Trench Cover Applications
Drainage & Floor Drains
Grating covers for surface water and process drains in plants, kitchens and pool surrounds — open mesh lets water through while preventing falls and debris entry.
Cable & Service Trenches
Removable fiberglass trench covers give safe, non-conductive access over buried cable and pipe runs, avoiding the rust and corrosion of steel covers in wet areas.
FRP Drainage Grating
FRP drainage grating is the open-mesh or slotted panel family for drains, gutters and channels that must stay free-flowing under foot and light vehicle traffic.
Load, Surface & Supply
Load-Rated & Anti-Slip
Pedestrian-grade covers in 25/30 mm; forklift/vehicle zones in 38/50 mm heavy-duty profiles — see heavy-duty GRP grating. Gritted or concave anti-slip tops from anti-slip FRP grating.
Ordering
Send trench width, cover length, required load (pedestrian/forklift) and quantity. Browse products, cut-to-size covers and quote via contact.
FRP Trench Cover Grating Technical Specifications & Sizes
FRP trench and drainage covers keep walkways and traffic decks safe while allowing drainage and access to channels. The table below shows the standard sizes and load classes we manufacture to, including matching steel or FRP frames.
| Parameter | Standard Range | Notes |
|---|---|---|
| Cover thickness | 25 / 38 / 50 / 75 mm | Deeper for vehicle traffic |
| Clear opening span | up to 500 mm | Longer spans need deeper covers |
| Panel / cover size | up to 1000×2000 mm | Cut to trench width |
| Mesh / slot | 38×38 / 19×19 / slotted | Slotted for debris shedding |
| Surface | Grit-top / smooth / solid-top | Solid top available for foot traffic |
| Resin system | Isophthalic / Vinyl ester | Vinyl ester for chemical channels |
| Typical load class | A (pedestrian) – D (forklift/vehicular) | Per EN/ISO load rating |
Covers are supplied with matching frames and hinge/lock options, with COA and load test reports.
FRP vs Ductile Iron vs Steel Trench Covers
Trench covers face corrosion, loading and (often) theft. The table compares FRP against the traditional ductile iron and steel gratings on the properties that decide the purchase.
| Property | FRP Cover | Ductile Iron | Steel Grating |
|---|---|---|---|
| Corrosion | Immune | Rusts unless coated | Rusts, recoat needed |
| Weight | Light, easy lift | Very heavy (needs keys) | Heavy |
| Load | Pedestrian to forklift | Very high (vehicular) | High |
| Theft value | Zero scrap value | High scrap theft | Scrap theft risk |
| Slip when wet | Grit/slotted, safe | Slippery | Slippery |
FRP covers remove both rust maintenance and scrap-theft — see the cost comparison.
Resin Selection for Trench Covers
Drainage channels often carry water, oils or dilute chemicals, so resin choice matters. General drainage uses isophthalic polyester; chemical and wastewater channels step up to vinyl ester.
| Resin | Relative Cost | Chemical Resistance | Fire Rating | Best For |
|---|---|---|---|---|
| Isophthalic polyester | Baseline | Good | ASTM E-84 Class B | General walkways and platforms |
| Vinyl ester | +15–25% | Excellent (acids, alkalis, H2S) | ASTM E-84 Class B | Chemical, marine, wastewater |
| Phenolic | +20–35% | Moderate | ASTM E-84 Class A (low smoke) | Tunnels, rail, fire-critical zones |
Tell us what flows in the channel and we will specify the right resin — see vinyl ester vs polyester.
Cover Load Class and Span Selection
The right cover depends on what crosses it. Under-spec a vehicular trench and it deflects or cracks; over-spec it and you pay for unnecessary section.
| Traffic | Recommended Thickness | Max Clear Span |
|---|---|---|
| Pedestrian walkway | 25–38 mm molded | 300 mm |
| Light pallet truck | 38–50 mm molded | 400 mm |
| Forklift / yard traffic | 50–75 mm pultruded | 500 mm |
| Solid-top foot cover | 38 mm molded smooth | 300 mm |
Send your trench width and wheel load (kN) and we confirm the load class before quoting.
Trench Cover Installation Guide
- Set a level steel or FRP frame in the channel edges; allow the cover full bearing on all sides.
- Check clear span against the cover's rated span — do not bridge longer than rated.
- Bed covers flush with the floor to avoid trip hazards in walkways.
- Use hinge or lock hardware on covers over deep channels or in public areas.
- Confirm grit/slot orientation for slip resistance and debris shedding; reseal cut edges if trimmed.
See the installation guide and grating clips for fixing.
Where FRP Trench Covers Are Used
Wastewater treatment plants: vinyl ester covers over channels resist H2S and acid mists and never rust-stain decks — see wastewater plant applications.
Food and beverage processing: slotted FRP covers drain wash-down water, are non-corrosive to cleaners and carry zero scrap-theft risk.
Car parks and industrial yards: light, non-slip FRP covers replace heavy iron gratings that trip maintenance crews and invite theft.
Slotted, Solid-Top, Hinged and Locked Covers
Beyond standard mesh covers we supply slotted anti-slip covers for oily floors, solid-top smooth covers for foot traffic and clean rooms, and hinge-up or lockable covers for deep channels. Covers pair with FRP covers and panels and can be custom-sized via custom FRP grating.
Related Products and Guides
- FRP Covers and Panels — trench and drainage covers
- FRP Molded Grating — panel material for covers
- FRP Grating Clips — frame fixing hardware
- Anti-Slip FRP Grating — grit/slot surfaces
- FRP Grating for Wastewater Plants
- FRP Grating Glossary
Request Your FRP Trench Cover Grating Quote
Email sales@gratingfrp.com · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
FRP Trench Cover Grating FAQ
Product and factory gallery






