GRP Grating Manufacturer
Molded & Pultruded GRP Grating · Vinyl Ester · Anti-Slip Surfaces — direct glass reinforced plastic grating factory with 20+ years experience, ISO 9001 / CE / ABS certified and exported to 45+ countries.
FRP Grating Master (NANTONG ZEALL NEW MATERIALS CO., LTD.) is a specialist GRP grating manufacturer based in Nantong, China. We produce molded and pultruded glass reinforced plastic (GRP) grating for walkways, platforms, trench covers and stair treads, supplying distributors, EPC contractors and end-users across Australia, the UK, Europe, the Middle East and 45+ countries. Unlike trading companies, you deal directly with the factory — from resin chemistry and moulding to QC, loading and export documentation.
Why Source GRP Grating from FRP Grating Master
Manufacturing Capacity
We run dedicated molded and pultruded GRP grating lines with stable monthly output, so we can service both sample-sized trial orders and large project releases without subcontracting. Standard panel sizes, bar spacings and resin systems are held in production-ready form.
Quality Control & Certifications
Every batch follows our ISO 9001 quality system and is supported by third-party certification: CE, ASTM E-84 Class B fire rating, ABS and Intertek. We provide mill/ batch test certificates (COA), MSDS and load test reports with shipment, so specifiers can verify properties on site.
Resin & Material Options
We offer orthophthalic polyester (general purpose), isophthalic polyester (improved corrosion) and vinyl ester (heavy chemical service) resin systems, with standard thicknesses of 25 mm, 30 mm, 38 mm and 50 mm. UV-stabilised resin is standard for outdoor and coastal GRP grating.
Reliable Delivery & Export
We export to Australia, New Zealand, the UK, Ireland, Europe and the Middle East with full documentation (COA, MSDS, load reports, packing lists). Lead times are planned per project, and crating/container loading is optimised to minimise freight cost — see our FRP grating price guide for indicative ranges.
GRP Grating Manufacturing Standards by Export Market
A GRP grating manufacturer that exports into forty-odd countries does not build one product and ship it everywhere. The panel is the same; what changes is the standard the buyer is held to, the document set that has to travel with it, and the resin system that survives the local climate. Buyers who do not ask this question early end up with a panel that is correct and a paperwork pack that is not, which is where approvals stall.
| Market | Governing standard | What the buyer actually checks | What we supply |
|---|---|---|---|
| United Kingdom | BS 4592-1:2006, BS EN 13706, EN 13501-1 | Load class against the walkway duty, fire classification for covered structures, and a load calculation that a checking engineer will sign | Load calculation, resin datasheet, EN 13501-1 classification, ISO 9001 certificate number |
| Ireland | BS 4592-1, BS EN 13706 (via UK practice) | Same as UK; often specified through a UK-based consultant or contractor | Identical pack to UK, delivered against the Irish project programme |
| European Union | EN 13706 for pultruded profiles, EN 13501-1 for fire, EN 124 where covers carry traffic | Declaration of performance for the profile, fire class, and CE marking where the product is actually covered by a harmonised standard | Profile properties to EN 13706 grade, fire test classification, honest statement of where CE marking does and does not apply |
| United States | ASTM E84 (surface burning), manufacturer load tables | Flame spread and smoke index, plus a published load table with a stated safety factor | ASTM E84 classification, load tables with deflection limits stated explicitly |
| Australia and New Zealand | AS 1657 (fixed platforms, walkways, stairways) | Access and egress compliance, slip resistance, and structural adequacy for the intended duty | Panel data mapped to AS 1657 requirements, DIN 51130 slip classification |
| Gulf and Middle East | Project specification, usually ASTM or BS adopted by the consultant | UV performance and heat resistance first, because the service environment destroys an under-specified panel in three summers | UV-stabilised vinyl ester or ISO, higher colour stability, documented service temperature |
| Canada | CSA and provincial building requirements, ASTM E84 | Cold-weather impact behaviour, plus flame spread for enclosed spaces | Low-temperature impact data, ASTM E84 classification |
The pattern worth noticing is that the panel barely changes but the evidence does. A UK project will not accept an ASTM E84 report in place of an EN 13501-1 classification, and a US project will not accept the reverse. A manufacturer who cannot produce the document your market asks for is not a cheaper supplier, it is a schedule risk.
Two specific traps in this area. First, CE marking: there is no harmonised European product standard covering grating as a category, so a supplier claiming a CE-marked GRP grating panel as a grating is either misunderstanding the regulation or dressing up a profile certificate. What is real and checkable is EN 13706 for the pultruded profile, EN 13501-1 for reaction to fire, and third-party load test data. Second, ISO 9001: ask for the certificate number and verify it with the certification body. A scanned certificate with no verifiable number is not evidence.
When you request a quotation, state the destination market and the standard your project is being checked against. The quotation will then carry the right document set from the start instead of surfacing the gap at the approval stage, which is where most export orders lose two weeks.
Our GRP Grating Product Range
Molded & Pultruded GRP Grating
We manufacture both molded (mono-directional square mesh) and pultruded (built-up bar) GRP grating. Explore the full range on our products page, learn the material on GRP grating and fiberglass grating, or compare FRP grating manufacturing.
Surface & Application Variants
Standard gritted, concave (serrated) and smooth tops are available, plus anti-slip walkway grating, heavy-duty GRP grating for truck/ forklift zones, trench and drainage covers, and stair tread nosings.
GRP Grating Factory
As a GRP grating factory we control moulding and pultrusion lines, resin formulation and CNC cutting in one plant, so buyers get factory-direct pricing and full batch traceability.
GRP Grating Technical Specifications and Standard Sizes
GRP (glass-reinforced plastic) grating — the same product family as FRP and fiberglass grating — is manufactured in our Nantong plant from continuous glass reinforcement and a thermoset resin matrix. The table below lists the standard molded and pultruded GRP grating we produce, so specifiers can match mesh, thickness and resin to the drawing before requesting a factory quote.
| Parameter | Molded GRP Grating | Pultruded GRP Grating |
|---|---|---|
| Panel thickness | 25 / 30 / 38 / 50 mm | 25 / 38 / 50 / 75 / 100 mm |
| Mesh / bar spacing | 38×38 / 19×19 / 12×12 mm | 38 / 50 mm centre-to-centre |
| Standard panel size | 1220×3660 mm | 1220×3660 / 1220×6000 mm |
| Surface finish | Grit-top / Concave / Smooth / Covered | Grit-top / Smooth |
| Resin system | Iso-polyester / Vinyl Ester / Phenolic | Iso-polyester / Vinyl Ester / Phenolic |
| Glass content (by weight) | 25 – 30 % | 55 – 65 % |
| Standard colours | Grey, green, yellow, black | Grey, green, custom RAL |
| Typical load class | A – C | B – D |
GRP Grating vs Steel and Aluminum Grating
Specifiers often ask why a GRP grating manufacturer would switch projects away from metal. The short answer is weight, corrosion and zero ongoing painting. The comparison below is based on typical industrial walkway duty, not a single isolated property.
| Property | GRP / FRP Grating | Steel Grating | Aluminum Grating |
|---|---|---|---|
| Density | ~1.9 g/cm³ (1/4 of steel) | ~7.8 g/cm³ | ~2.7 g/cm³ |
| Corrosion resistance | Excellent; does not rust | Rusts; needs coating | Corrodes in salt/alkali |
| Electrical conductivity | Non-conductive | Conductive | Conductive |
| Maintenance | Near zero | Repaint every 2–4 years | Periodic coating |
| Typical service life | 20+ years in corrosive duty | 5–10 years without coating | 15–20 years |
| Fire performance | ASTM E-84 Class B (Class A phenolic) | Non-combustible | Melts at ~660°C |
| Relative installed cost | Medium | Low upfront | Medium-high |
Resin Selection in GRP Grating Manufacturing
The resin matrix defines the chemical and fire behaviour of the finished panel. As a GRP grating manufacturer we control the resin bath in-house, so you choose the system that fits the environment rather than whatever a trader happens to stock.
| Resin | Relative Cost | Chemical Resistance | Fire Rating | Best For |
|---|---|---|---|---|
| Orthophthalic polyester | Baseline | General indoor use | ASTM E-84 Class B | Dry, mild environments |
| Isophthalic polyester | +5–10% | Good; moisture & dilute chemicals | ASTM E-84 Class B | Walkways, platforms, food plants |
| Vinyl ester | +15–25% | Excellent (acids, alkalis, H2S, salt) | ASTM E-84 Class B | Chemical, marine, wastewater |
| Phenolic | +20–35% | Moderate; very low smoke | ASTM E-84 Class A | Tunnels, rail, fire-critical zones |
GRP Grating Manufacturing Process
Buyers ask to see the process for two reasons: to judge whether the factory is a real manufacturer or a trading desk, and to understand where the failure modes live. Both are fair questions, and both are answered by the sequence rather than by the marketing.
Resin and Glass Specification
Resin type, glass content and strand format are fixed against the exposure before anything is mixed. A vinyl ester panel for a coastal deck and an ISO panel for an indoor walkway are different products from this step onward, not at the end.
Mould Preparation
Matched metal moulds are cleaned, release-coated and brought to temperature. Mould condition is the single largest driver of surface finish and bar geometry consistency, which is why tooling is maintained on a schedule rather than on complaint.
Resin Pour and Glass Placement
Resin and chopped strand are placed into the mould in a controlled sequence so the bar stays uniform through its full depth. Uneven glass distribution is what produces a panel that passes at the edge and flexes in the middle.
Compression and Cure
Heat and pressure close the mould and cure the resin. Cure cycle control decides Barcol hardness and the degree of cross-linking; a short cure saves cycle time and costs the panel its chemical resistance at year five.
Demoulding and Trim
Panels are demoulded and trimmed to the standard footprint. Edges are inspected at this point, because a cut that exposes dry glass is a defect that cannot be fixed later by a topcoat.
Surface Finish
Gritted, concave or smooth finish is applied or moulded in depending on the specified slip class. A gritted finish is not decoration; it is what carries the R11 to R13 classification in a tender.
QC and Load Verification
Barcol hardness, bar geometry, panel dimensions and weight per square metre are checked against the specification. Load and deflection performance is verified against the published table, and third-party test reports are issued where a project requires them.
Packing for Sea Freight
Panels are stacked and secured for container transport, with edge protection because a GRP panel that has been dropped at a corner has lost section exactly where it will be sat on a bearer. Packing specification matters more on a forty-day sea route than on a one-day road delivery.
The pultruded line runs a different sequence: continuous roving is pulled through a heated die to form the I-bar or T-bar profile, the bars are cut to length, assembled into a panel with a locking resin, and then finished and inspected. The die temperature and pull speed decide the fibre volume fraction, and that decides the stiffness that lets a pultruded panel span 1.2 m where a moulded panel of the same depth would deflect out of limit.
What this process description is meant to establish is narrower and more useful than a factory tour: every failure mode a buyer can experience — soft bars, uneven surface, exposed glass at a cut edge, a panel that flexes at the centre of the bay — originates at a specific step that can be audited. If you are qualifying a supplier, ask which step they hold records for and how far back those records go. A factory that cannot answer that is assembling panels, not manufacturing them.
Load Performance and Thickness Selection
Glass content and bar profile determine how far a GRP grating panel spans. This quick selector matches common duties to the panel we would release from production, with typical support spans for pedestrian to light-vehicle use.
| Application | Recommended Panel | Typical Support Span | Duty Class |
|---|---|---|---|
| Pedestrian walkway | 25–30 mm molded | 450–600 mm | A |
| General platform | 38 mm molded | 600–750 mm | B |
| Pallet truck / light vehicle | 50 mm molded | 750–900 mm | C |
| Long span / heavy load | 50–100 mm pultruded | 900–1500 mm | D |
Installation Guide and Fixing
- Check drawings and confirm bearing support; lay panels on clean, level steel or GRP beams with the recommended bearing width on each support.
- Pre-drill fixing holes only where needed; align panels to the grid and leave a 10–15 mm expansion gap between adjacent panels.
- Fasten with stainless steel FRP grating clips — minimum 4 clips per 1220×3660 mm panel, one at each corner, plus extra clips for heavy traffic or wind-uplift zones.
- Cut panels with a carbide-tipped or diamond blade; wear dust protection and seal cut edges on vinyl ester or phenolic panels when required.
- Walk the installed grid to check deflection and clip torque, then clear offcuts and install edge trim or toe-kicks where specified.
See the step-by-step installation guide and the grating clip range for fixing details.
Industry Applications and Manufacturing Experience
Water and wastewater plants: vinyl ester GRP grating is the standard floor for aeration galleries and tank tops — no rust staining, no shutdown for coating, and batch traceability from our own production.
Chemical and petrochemical sites: isophthalic or vinyl ester molded and pultruded panels resist acid and alkali fumes, reducing the maintenance that painted steel requires in the same areas.
Commercial and infrastructure: from mezzanine platforms to stair treads and trench covers, our plant supplies cut-to-size GRP grating to contractors who need a real manufacturer behind the supply, not a reseller.
Our GRP Manufacturing Capability and Glossary
Buyers new to the sector often confuse acronyms. GRP (glass-reinforced plastic), FRP (fiber-reinforced plastic) and GFRP all describe the same family: glass fibre embedded in a cured resin. In molding, continuous glass roving and mat are hand- or machine-laid over a mould and roller-poured with resin, producing a one-piece grid. In pultrusion, pulled roving and mats are pulled through a resin bath and a heated die to form constant-section bars (I-bar, T-bar). We run both processes on the same site, plus gel-coat surfacing, CNC cutting and load-testing, so a single order can mix molded panels and pultruded profiles under one quality system.
Every batch is identified by resin lot, glass lot and production date, and supplied with mill certificates on request.
Related Products and Guides
More GRP guides: GRP grating price · GRP grating clips · GRP walkway grating · GRP trench cover grating · GRP stair tread grating
- FRP Molded Grating — one-piece molded panels produced in-house
- FRP Pultruded Grating — I-bar and T-bar profiles for long spans
- FRP Grating Clips — SS304 / SS316 fixing fasteners
- FRP Grating Price — 2026 factory-direct pricing guide
- FRP Grating Glossary — GRP, FRP and GFRP terminology explained
- Molded vs Pultruded Grating — process and performance comparison
GRP Platform Grating
Platform decking to BS 4592, including how a platform differs from a catwalk and which load case governs the panel.
GRP Channel Grating
Covers for trenches, cable ducts, sumps and drainage channels, including load class selection and one-man lifting.
GRP Catwalk
The route rather than the platform: frame pitch, span between supports, handrail requirements and end details.
GRP Grating Suppliers
How to tell a factory from a trader, the four technical questions to ask, and the red flags that should stop an order.
Request Your GRP Grating Manufacturer Quote
Email sales@gratingfrp.com · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
Explore GRP Grating by Topic
- GRP Grating
- FRP Grating
- GRP Grating Manufacturer
- GRP Grating Supplier
- GRP Grating Panels
- Heavy Duty GRP Grating
- Anti Slip FRP Grating
- Mini Mesh Grating
- Phenolic Grating
- FRP Trench Cover Grating
- FRP Stair Tread Grating
- FRP Walkway Grating
- GRP Structural Profiles
- FRP Handrail
- FRP Grating Clip
- Standards
- Specs
- Glossary
- Resources
GRP Grating Manufacturer FAQ
Pultruded GRP Grating Factory: Production Lines and Capacity
Our pultruded GRP grating factory has run since 2004 from a 20,000 m² plant with 200+ staff, exporting to 45+ countries. Pultrusion lines pull E-glass roving through isophthalic, vinyl ester and polyurethane resin to produce I-bar, T-bar and channel bearing sections, which are then assembled into the pultruded FRP grating panels buyers know. GRP here is the British term for the same FRP material.
Standard panels are 1220 × 3660 mm; a 38 mm pultruded board weighs about 87 kg, roughly a third of steel. Fire performance meets ASTM E84 Class B and the material is inherently non-conductive, which is why GRP walkways are standard around substations, rail zones and MRI suites.
GRP Structural Sections Factory: Profiles Beyond the Panel
The same lines that draw GRP structural sections factory product — angles, tubes, I-beams, hollow sections and rectangular bars — feed both the grating mesh and independent structural orders. Buyers needing handrails, supports or cable trays can take them from the same production run as the FRP grating panels panels, which keeps material, colour and resin grade consistent across the project.
Quality is held under ISO 9001 (01708Q11888R0S, to 2028) and product performance to ASTM F3059; older ABS PDA documentation is expired. MOQ is 10 m² and lead time runs 12–36 working days; panels, sections, bearers and clips are consolidated into one container through pultruded grating supplier.
Also known as: fibreglass = fiberglass; GRP, FRP, GFRP and composite are the same glass-reinforced plastic; pultruded / pultrusion and panel / plank / bar grating describe the same mesh and profiles under different names.
Standard panel and order facts:
| Standard panel | 1220 × 3660 mm |
| 38 mm panel weight | about 87 kg |
| MOQ | 10 m² |
| Lead time | 12–36 working days |
| Founded | 2004 |
| Factory | 20,000+ m², 200+ staff, 40+ export countries |
GRP Grating Manufacturer: Frequently Asked Questions
GRP or FRP — are they the same?
Yes. GRP is the British term and FRP the international term for glass-reinforced thermoset plastic. The pultruded GRP grating factory and the FRP line are the same plant, producing I-bar, T-bar and channel sections to identical specifications.
What clear span can your GRP panels reach?
A 65 mm T-bar carries about 62 kN/m² at 600 mm span; a 50 mm T-bar walkway at L/200 is good to about 1.2 m. Beyond that we add intermediate bearers rather than oversizing the panel.
What is the MOQ, lead time and certification?
MOQ 10 m², lead time 12–36 working days. ISO 9001 (to 2028) and ASTM F3059 tested; the old ABS PDA mark is expired and should not be relied on.
